StarcrownDomes & Zomes
Cart 0
Maia Zome rendering
Loading the model…
100%
Roof
Light
Floor
27sq ft
Parts in the model
489
Guide pages
25
Height to the top
6'-3 11/16"

The name

One of the Seven Sisters; across most of Europe the Pleiades were called “the hen and her chicks”.

A raised zome coop for 3 to 5 hens.

A 7-fold zome coop on legs: a nest arc that follows the facets with lids that open past vertical, a pop door with an opener mount, a caretaker door and a screened crown vent under a rain cap.

  • Nest arc with lids
  • Pop door with opener mount
  • Screened crown vent
  • Caretaker door
  • 2x3 edition

Views from the model

Every view is the real plan.

Maia Zome: front
Front
Maia Zome: back
Back
Maia Zome: nests
Nests
Maia Zome: pop door
Pop door
Maia Zome: caretaker door
Caretaker door
Maia Zome: vent
Vent
Maia Zome: crown
Crown
Maia Zome: inside
Inside
Maia Zome: the frame
The frame
Maia Zome: stand
Stand
Maia Zome: knee
Knee

The build guide, declassified

945 figures. Every one withheld here.

These are real pages from the Maia Zome guide. Every length, angle and count is blacked out and the instructions are fogged, so you can see how much is in it, not what it says. Your copy has all of it.

A page from the Maia Zome build guide, cover, with every figure redacted
A page from the Maia Zome build guide, materials, with every figure redacted
A page from the Maia Zome build guide, panels, with every figure redacted
A page from the Maia Zome build guide, panels, with every figure redacted
A page from the Maia Zome build guide, strut cut list, with every figure redacted
A page from the Maia Zome build guide, assembly sequence, with every figure redacted

The cover · 20 figures withheld on it

pages
25
in each of 4 editions
chapters
14
from foundation to the last screw
figures
945
every length, offset and count
angles
45
miters, bevels and corners
drawings
20
panels, jigs, framing
table rows
159
across 22 tables

The chapters

  1. Read first
  2. Materials
  3. Panels
  4. Strut cut list
  5. Stand and floor
  6. Knee wall and siding
  7. Base
  8. Raising the shell, and the crown vent
  9. Skins, roofing and windows
  10. Nest boxes
  11. Pop door and ramp
  12. Caretaker door and low vent
  13. Connections and fasteners
  14. Assembly sequence

What's in the plan

Everything to build the shell.

  • Build guide2x4 frame: 25 pages, metric edition 26 · 2x3 frame: 25 pages, metric edition 26
  • Cut listsEvery piece by length and angle, imperial and metric, as CSV
  • Materials listStock lengths and sheets you can buy at a big-box store
  • Jig shapesThe exact jig for every panel shape, laid out on one sheet where it fits
  • 3D viewerWalk round and through the model, measure any part, in ft-in or mm
  • 3D model pack +$56The full model for SketchUp (COLLADA .dae), STEP and FreeCAD (.FCStd), one group per part

Complete the set · The Whole Sky

Every plan we draw, $9.84 a plan.

All 32 plans: every home, greenhouse, coop and backyard building, the deck, and the Triangulum compound. Each one is the full plan set, the same as buying it on its own.

32 plans one at a time
$1,826
As the bundle
$315
You keep
$1,51183% off

Specifications

FormZome
Geometry7-fold zome, 1'-9" panel edge
Across6'-10 1/4"
Floor area27 sq ft
Height6'-3 11/16" inside
Stands on3' knee wall on a floor raised on legs
Frame editions2x4, 2x3
Hens3–5
Parts in the model489, each checked for overlaps and bearing
UnitsImperial and metric editions

Questions about the Maia Zome

How big is the Maia Zome?

6'-10 1/4" across and 6'-3 11/16" tall inside, with 27 sq ft inside.

What frame lumber does the Maia Zome use?

It comes in a standard 2x4 frame and a 2x3 edition, each with its own guide and cut lists. Both are in the plan set.

Does the Maia Zome need a permit?

It is 27 sq ft inside, under the 120 sq ft that many places exempt for one-story accessory buildings. Rules vary, so check with your local building department.

What do I get when I buy the plan?

A 25-page build guide in imperial and metric editions for each frame edition, cut lists, a materials list, jig shapes for every panel and the interactive 3D viewer with a measuring tool. The 3D model pack adds the full model for SketchUp (COLLADA), STEP and FreeCAD.

Nearby in the sky

More coops