StarcrownDomes & Zomes
Cart 0

Dome calculator

Geodesic dome calculator

Class I geodesic domes from an icosahedron. Every number here is computed in your browser by subdividing the icosahedron and projecting it to the sphere.

Frequency

Strut types for the chosen dome
StrutChord factorLengthHemisphereSphere
Triangle types for the chosen dome
TriangleHemisphereSphere

Reference

Chord factors for 2V, 3V and 4V domes

Multiply a chord factor by the dome's radius to get the strut length, centre of hub to centre of hub. Counts are for a hemisphere; 3V has no level hemisphere (see below).

2V class I

StrutChord factorHemisphereFull sphere
A0.546533060
B0.618033560

3V class I

StrutChord factorAbove the equatorFull sphere
A0.348623060
B0.403554090
C0.4124150120

4V class I

StrutChord factorHemisphereFull sphere
A0.253183060
B0.2945360120
C0.295243060
D0.298593060
E0.3128770120
F0.324923060

How to use these numbers

A geodesic dome divides each of the icosahedron's 20 triangles into smaller ones and pushes every new point out to the sphere. The frequency (2V, 3V, 4V...) is how many parts each icosahedron edge is cut into. Higher frequencies give a rounder dome with more, shorter struts of more lengths: more labour, smaller panels.

Even frequencies have a ring of vertices exactly on the equator, so they cut into a level hemisphere. Odd frequencies don't: a 3V dome is usually built as a 3/8 or 5/8 sphere, and the common 5/8 split stands slightly off level. Our Solstice and Deneb domes use Kruschke's 3V split instead, which has four strut lengths and a level 15-sided base.

Struts in a hub-and-strut dome are cut to the chord length less the hub. In a panelized dome, which is how every Starcrown dome is built, each triangle is framed flat on a jig with bevelled edges, and the chord factor sets the panel's outside edge. Read geodesic domes explained and hubs vs hubless panels.