StarcrownDomes & Zomes
Cart 0
Antares Zome 10 rendering
Loading the model…
100%
Roof
Light
Floor
53sq ft
Parts in the model
325
Guide pages
25
Height to the top
10'-1 5/16"

The name

The red star whose name means “rival of Mars”.

A zome sauna: 393 cubic feet for an 8 kW heater.

An 8-fold zome at a 2'-3" edge on a 3-foot knee wall, in 2x6 with mineral wool, foil and a furred lining (no spray foam), a stock 24" sauna door, intake and exhaust vents, and a slab floor sloped to a drain.

  • Mineral wool, foil and furring
  • Stock sauna door
  • Intake and exhaust vents
  • 6'-11" over the upper bench

Views from the model

Every view is the real plan.

Antares Zome 10: section
Section
Antares Zome 10: the frame
The frame
Antares Zome 10: from above
From above
Antares Zome 10: approach
Approach
Antares Zome 10: door
Door
Antares Zome 10: side
Side
Antares Zome 10: back
Back
Antares Zome 10: inside
Inside
Antares Zome 10: up
Up

The build guide, declassified

1,042 figures. Every one withheld here.

These are real pages from the Antares Zome 10 guide. Every length, angle and count is blacked out and the instructions are fogged, so you can see how much is in it, not what it says. Your copy has all of it.

A page from the Antares Zome 10 build guide, cover, with every figure redacted
A page from the Antares Zome 10 build guide, materials, with every figure redacted
A page from the Antares Zome 10 build guide, panels, with every figure redacted
A page from the Antares Zome 10 build guide, panels, with every figure redacted
A page from the Antares Zome 10 build guide, strut cut list, with every figure redacted
A page from the Antares Zome 10 build guide, assembly sequence, with every figure redacted

The cover · 24 figures withheld on it

pages
25
imperial and metric
chapters
11
from foundation to the last screw
figures
1,042
every length, offset and count
angles
48
miters, bevels and corners
drawings
19
panels, jigs, framing
table rows
189
across 28 tables

The chapters

  1. Read first
  2. Materials
  3. Panels
  4. Strut cut list
  5. Footing and floor
  6. Knee wall and base
  7. Raising the shell and skinning it
  8. Insulation, vents and the inside
  9. Doorway and door
  10. Connections and fasteners
  11. Assembly sequence

What's in the plan

Everything to build the shell.

  • Build guide25 pages, metric edition 25
  • Cut listsEvery piece by length and angle, imperial and metric, as CSV
  • Materials listStock lengths and sheets you can buy at a big-box store
  • Jig shapesThe exact jig for every panel shape, laid out on one sheet where it fits
  • 3D viewerWalk round and through the model, measure any part, in ft-in or mm
  • 3D model pack +$56The full model for SketchUp (COLLADA .dae), STEP and FreeCAD (.FCStd), one group per part

Complete the set · The Whole Sky

Every plan we draw, $9.84 a plan.

All 32 plans: every home, greenhouse, coop and backyard building, the deck, and the Triangulum compound. Each one is the full plan set, the same as buying it on its own.

32 plans one at a time
$1,826
As the bundle
$315
You keep
$1,51183% off

Specifications

FormZome
Geometry8-fold zome, 2'-3" panel edge
Across10'-3 13/16"
Floor area53 sq ft
Height10'-1 5/16"
Stands on3' knee wall on a slab
Frame editions2x6
Parts in the model325, each checked for overlaps and bearing
UnitsImperial and metric editions

Questions about the Antares Zome 10

How big is the Antares Zome 10?

10'-3 13/16" across and 10'-1 5/16" tall, with 53 sq ft inside.

What frame lumber does the Antares Zome 10 use?

A 2x6 frame for the shell.

Does the Antares Zome 10 need a permit?

It is 53 sq ft inside, under the 120 sq ft that many places exempt for one-story accessory buildings. The heater’s wiring, or a wood stove’s chimney, needs its own permit or inspection in most places. Rules vary, so check with your local building department.

What do I get when I buy the plan?

A 25-page build guide in imperial and metric editions, cut lists, a materials list, jig shapes for every panel and the interactive 3D viewer with a measuring tool. The 3D model pack adds the full model for SketchUp (COLLADA), STEP and FreeCAD.

Nearby in the sky

More backyard