StarcrownDomes & Zomes
Cart 0
Altair Zome 12 rendering
Loading the model…
100%
Roof
Light
Floor
82sq ft
Parts in the model
587
Guide pages
29
Height to the top
11'-8 5/8"

The name

Altair, a bright summer star: the third corner of the Summer Triangle with Vega and Deneb.

An insulated zome studio under 120 sq ft.

The Spica 12’s shell at a 2'-9½" edge, in 2x6 with the homes’ insulated skin: 82 sq ft inside, 95% standing room, a stock 2'-8" door on header hangers, three windows and a landing deck with steps.

  • Under 120 sq ft
  • Insulated 2x6 shell
  • Stock 2'-8" door
  • Landing deck and steps

Views from the model

Every view is the real plan.

Altair Zome 12: approach
Approach
Altair Zome 12: front
Front
Altair Zome 12: inside
Inside
Altair Zome 12: inside, looking up
Inside, looking up
Altair Zome 12: side
Side
Altair Zome 12: steps
Steps
Altair Zome 12: deck
Deck
Altair Zome 12: on the deck
On the deck
Altair Zome 12: the frame
The frame
Altair Zome 12: floor framing
Floor framing
Altair Zome 12: door
Door
Altair Zome 12: from above
From above

The build guide, declassified

1,398 figures. Every one withheld here.

These are real pages from the Altair Zome 12 guide. Every length, angle and count is blacked out and the instructions are fogged, so you can see how much is in it, not what it says. Your copy has all of it.

A page from the Altair Zome 12 build guide, cover, with every figure redacted
A page from the Altair Zome 12 build guide, materials, with every figure redacted
A page from the Altair Zome 12 build guide, panels, with every figure redacted
A page from the Altair Zome 12 build guide, panels, with every figure redacted
A page from the Altair Zome 12 build guide, strut cut list, with every figure redacted
A page from the Altair Zome 12 build guide, assembly sequence, with every figure redacted

The cover · 18 figures withheld on it

pages
29
imperial and metric
chapters
12
from foundation to the last screw
figures
1,398
every length, offset and count
angles
60
miters, bevels and corners
drawings
21
panels, jigs, framing
table rows
249
across 37 tables

The chapters

  1. Read first
  2. Materials
  3. Panels
  4. Strut cut list
  5. Foundation and floor
  6. Pony wall
  7. Base
  8. Doorway and awning
  9. Landing, deck and steps
  10. Connections and hardware
  11. Insulation and climate
  12. Assembly sequence

What's in the plan

Everything to build the shell.

  • Build guide29 pages, metric edition 30
  • Cut listsEvery piece by length and angle, imperial and metric, as CSV
  • Materials listStock lengths and sheets you can buy at a big-box store
  • Jig shapesThe exact jig for every panel shape, laid out on one sheet where it fits
  • 3D viewerWalk round and through the model, measure any part, in ft-in or mm
  • 3D model pack +$56The full model for SketchUp (COLLADA .dae), STEP and FreeCAD (.FCStd), one group per part

Complete the set · The Whole Sky

Every plan we draw, $9.84 a plan.

All 32 plans: every home, greenhouse, coop and backyard building, the deck, and the Triangulum compound. Each one is the full plan set, the same as buying it on its own.

32 plans one at a time
$1,826
As the bundle
$315
You keep
$1,51183% off

Specifications

FormZome
Geometry8-fold zome, 2'-9 1/2" panel edge
Across12'-7 1/8"
Floor area82 sq ft
Height11'-8 5/8"
Stands on3' pony wall on a raised floor
Frame editions2x6
Parts in the model587, each checked for overlaps and bearing
UnitsImperial and metric editions

Questions about the Altair Zome 12

How big is the Altair Zome 12?

12'-7 1/8" across and 11'-8 5/8" tall, with 82 sq ft inside.

What frame lumber does the Altair Zome 12 use?

A 2x6 frame for the shell.

Does the Altair Zome 12 need a permit?

It is 82 sq ft inside, under the 120 sq ft that many places exempt for one-story accessory buildings. That exemption is usually written for sheds and storage: a studio you insulate, wire or sleep in may need a permit even at this size. Rules vary, so check with your local building department.

What do I get when I buy the plan?

A 29-page build guide in imperial and metric editions, cut lists, a materials list, jig shapes for every panel and the interactive 3D viewer with a measuring tool. The 3D model pack adds the full model for SketchUp (COLLADA), STEP and FreeCAD.

Nearby in the sky

More backyard